What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
11.06.2025 16:09

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Now when you have a certain ac resistance, then a current flows in a loop.
Inside ‘Inside the NBA’ Transition to ESPN - Front Office Sports
But it can get overloaded, and no longer works.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
He then describes Rainy Season and Lightning.
Can I see some saggy tit pics and huge areolas pics?
2024–10–14 [Omar Gharbi Omar Gharbi ]
It also is a device that limits the change in current flow.
[image of Common-mode choke]
What are examples of real life forced feminization?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
But… the neutral is now “floating” because of the 1 ohm resistance.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
There are three different concepts here that are getting confused.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Athletics' Denzel Clarke leaps over wall to rob Angels' HR for incredible catch - ESPN
This is 'the assistant's answer'
This is the picture of an electronic coil of wire wound around a core of magnetic material.
For this case there are devices called Metal oxide varistors (MOV).
Barnstars:
These devices are installed between the “hot” and “neutral” and protective ground.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
As an inmate did you have to live alongside a bully for your whole sentence?
Edit 2024–10.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Jordan Ott hiring strengthens questions on Suns’ decision-making tree - Arizona Sports
but this device (an Inductor) … impedes the rapid changes in the current.
but I think this circuit , shows a few more pieces.
There are two important concepts here.
What questions are asked in a JP Morgan Hirevue interview?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
so, what happens?
The other is “what does a “fuse” do?”
'Call of Duty: Black Ops 7' to Star Milo Ventimiglia, Kiernan Shipka - Variety
These are simplified answers to the original question, and does not change anything I wrote above.
(Dc diagram shown, AC is similar).
At one ohm, the resistor has a maximum of 1 watt power.
What do you think of Andrew Tate?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
What is lightning?
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Is it wrong of me to feel uncomfortable that my friend thinks my brother is hot?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Yankees Planning To Place Luke Weaver On Injured List - MLB Trade Rumors
In schematic diagrams this is the symbol for a fuse:
a photo is worth a thousand words.
A circuit breaker is similar, but is resettable.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
One
the problem then depends on "how fast does the fuse operate?".
This is where the MOV conducts again, and dissipated the energy.
2024–10–16 [ OO OLAOYE OYEBODE ]
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
First Sentence:
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
The MOV will conduct when the voltage exceeds 50% of line voltage.
One is “what exactly is in a ‘surge protector’ ? ”
It seems Mohan does not understand the difference between a comment and an Answer.
The third is lightning and “how it gets conducted into a home.”
I post the exact comment here.
An AC voltage/ current source, and an ac inductive load.
[old diagram got deleted by accident]
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
nine
eight
A fuse is a non-resetable over current circuit protector.
He then asserts :
2024–10–10[John johnson John Johnson ]
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Upvotes:
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Because the load is inductive, the current lags the voltage.(by a bit).
The bolt then partially travels down the line to your home.
At least they know the answer if they wanted it.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
So, the voltage could go up to 500 volts, and the fuse will not open up.
What does a fuse do?
This one hit behind the barn.
Here is a simplified AC power diagram.
what exactly is a ‘surge’ protector?
This device then solves the entire problem.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
He then describes the function of a fuse.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.